Skip to main navigation Skip to search Skip to main content

Fabrication of on-Chip Based WGM Toroidal Microresonators Using Si Lithography and CO2 Laser Techniques

  • Deniss Zurikovs*
  • , Ints Murans
  • , Dilan Ortiz
  • , Dmitrijs Prigunovs
  • , Janis Alnis
  • , Toms Salgals
  • , Sergejs Marinins
  • , Mareks Parfjonovs
  • , Ilze Andersone
  • , Vjaceslavs Bobrovs
  • *Corresponding author for this work
  • Riga Technical University

Research output: Chapter in Book/Report/Conference proceeding › Conference paper › Research › peer-review

Abstract

The development of optical frequency combs (OFCs) on a chip is a significant technological advancement, combining the benefits of miniaturization, cost-effectiveness, and enhanced performance. The main goal is to develop an energy-efficient on-chip based whispering gallery mode (WGM) toroidal high-Q microresonator as a novel light source for a wide set of applications. This research aligns with the broader objective of advancing miniaturized and integrated photonics system solutions for telecommunication applications. This paper presents a novel fabrication approach for on-chip based WGM toroidal microresonators using silicon (Si) lithography and CO2 laser techniques. The proposed methodology integrates the precision and scalability of Si lithography with the localized heating and reshaping capabilities of CO2 lasers to achieve high-quality toroidal geometries with minimal surface roughness. Subsequent CO2 laser reflow is employed to reshape the microdisks into toroidal geometries, leveraging controlled thermal energy to enhance surface smoothness and minimize optical losses. Experimental characterization confirms the formation of high-quality factors (Q-factors) in the fabricated microresonators, demonstrating their suitability for practical wide range photonic applications. Additionally, the paper explores the influence of key parameters, including laser power, exposure time, and ambient conditions, on the final microresonator geometry and optical performance. Additionally, microscopy and SEM imaging provides valuable insights providing a deeper understanding that guides further technological improvements. This work establishes a robust and versatile platform for the on-chip based WGM toroidal microresonators, paving the way for advanced photonic devices with enhanced performance and functionality in various technological domains.

Original languageEnglish
Title of host publicationPhotonics and Electromagnetics Research Symposium - Spring, PIERS-Spring 2025
Subtitle of host publicationProceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)979-833159914-0
DOIs
Publication statusPublished - 2025
Event2025 Photonics and Electromagnetics Research Symposium - Spring, PIERS-Spring 2025 - Abu Dhabi, United Arab Emirates
Duration: 4 May 2025 → 8 May 2025

Publication series

Name2025 Photonics and Electromagnetics Research Symposium - Spring, PIERS-Spring 2025 - Proceedings

Conference

Conference2025 Photonics and Electromagnetics Research Symposium - Spring, PIERS-Spring 2025
Country/TerritoryUnited Arab Emirates
CityAbu Dhabi
Period4/05/25 → 8/05/25

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy
  2. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

OECD Field of Science

  • 1.3 Physical Sciences

Keywords

  • Carbon dioxide lasers
  • surface roughness factor

Fingerprint

Dive into the research topics of 'Fabrication of on-Chip Based WGM Toroidal Microresonators Using Si Lithography and CO2 Laser Techniques'. Together they form a unique fingerprint.

Cite this