TY - GEN
T1 - Influence of layers morphology on the sensitivity of SnO2-based optical fiber sensors
AU - Consales, M.
AU - Pisco, M.
AU - Pilla, P.
AU - Cusano, A.
AU - Buosciolo, A.
AU - Giordano, M.
AU - Viter, R.
AU - Smyntyna, V.
PY - 2006
Y1 - 2006
N2 - Recently, the capability of a SnO2 based silica optical fiber (SOF) sensors to detect ammonia at room temperature in water environment has been for the first time demonstrated [1-3], The SOF probes were deposited onto the fiber end by the simple and low cost Electrostatic Spray Pyrolysis technique (ESP), which allows to change the layers features by changing the deposition parameters. Here, it is experimentally demonstrated that modifications of the optical near field behavior occur when the sensitive overlay exhibits peaks with dimensions comparable with the light wavelength (1.55μm). In addition, the influence of the SnO2 layers morphology on the room temperature sensing performances against ammonia, in water environment, is preliminarily investigated. To the aim, before performing the ammonia adsorption measurements, the topography and the optical near field profile for different SnO 2-based sensors have been analyzed by a very complex instrumentation able to perform simultaneous Atomic Force Microscopy (AFM) and Scanning Near-field Optical Microscopy (SNOM) imaging.
AB - Recently, the capability of a SnO2 based silica optical fiber (SOF) sensors to detect ammonia at room temperature in water environment has been for the first time demonstrated [1-3], The SOF probes were deposited onto the fiber end by the simple and low cost Electrostatic Spray Pyrolysis technique (ESP), which allows to change the layers features by changing the deposition parameters. Here, it is experimentally demonstrated that modifications of the optical near field behavior occur when the sensitive overlay exhibits peaks with dimensions comparable with the light wavelength (1.55μm). In addition, the influence of the SnO2 layers morphology on the room temperature sensing performances against ammonia, in water environment, is preliminarily investigated. To the aim, before performing the ammonia adsorption measurements, the topography and the optical near field profile for different SnO 2-based sensors have been analyzed by a very complex instrumentation able to perform simultaneous Atomic Force Microscopy (AFM) and Scanning Near-field Optical Microscopy (SNOM) imaging.
UR - https://www.scopus.com/pages/publications/50149083303
U2 - 10.1109/ICSENS.2007.355601
DO - 10.1109/ICSENS.2007.355601
M3 - Conference paper
AN - SCOPUS:50149083303
SN - 1424403766
SN - 9781424403769
T3 - Proceedings of IEEE Sensors
SP - 851
EP - 854
BT - 2006 5th IEEE Conference on Sensors
T2 - 2006 5th IEEE Conference on Sensors
Y2 - 22 October 2006 through 25 October 2006
ER -