Magnetic Flux Switching Type Permanent Magnet Generator for Bicycles: Modelling and an Experimental Study

V. Bezrukovs; Vl Bezrukovs; M. Konuhova; D. Bezrukovs; A. Berzins; J. Trokss

doi:10.2478/lpts-2022-0024

Magnetic Flux Switching Type Permanent Magnet Generator for Bicycles: Modelling and an Experimental Study

V. Bezrukovs
, Vl Bezrukovs
, M. Konuhova
, D. Bezrukovs
, A. Berzins
, J. Trokss

Ventspils University College

Research output: Contribution to journal › Article › peer-review

3 Citations (Scopus)

Abstract

The article introduces two new designs of flux switching permanent magnet alternators with a radial and an axial arrangement of the inductor relative to the magnetic flux switch. The study presents the results of 3D magnetic flux modelling along with the outcomes of physical experiments. In the course of laboratory experiments, the results of theoretical estimations are compared with actual physical performance parameters. The results are presented in the form of power and output voltage curves in relation to the frequency and load current. The study proposes the practical application of the alternators based on the magnetic flux switching principle in the development of a bicycle generator. Laboratory test models are made of a laminated steel using a waste-free technology.

Original language	English
Pages (from-to)	48-57
Number of pages	10
Journal	Latvian Journal of Physics and Technical Sciences
Volume	59
Issue number	s3
DOIs	https://doi.org/10.2478/lpts-2022-0024
Publication status	Published - 1 Jun 2022
Externally published	Yes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Bicycles
magnetic fields
modelling
permanent magnet machines

Access to Document

10.2478/lpts-2022-0024

Cite this

@article{d4c50499aa7043a6b997793b12b89e6b,

title = "Magnetic Flux Switching Type Permanent Magnet Generator for Bicycles: Modelling and an Experimental Study",

abstract = "The article introduces two new designs of flux switching permanent magnet alternators with a radial and an axial arrangement of the inductor relative to the magnetic flux switch. The study presents the results of 3D magnetic flux modelling along with the outcomes of physical experiments. In the course of laboratory experiments, the results of theoretical estimations are compared with actual physical performance parameters. The results are presented in the form of power and output voltage curves in relation to the frequency and load current. The study proposes the practical application of the alternators based on the magnetic flux switching principle in the development of a bicycle generator. Laboratory test models are made of a laminated steel using a waste-free technology.",

keywords = "Bicycles, magnetic fields, modelling, permanent magnet machines",

author = "V. Bezrukovs and Vl Bezrukovs and M. Konuhova and D. Bezrukovs and A. Berzins and J. Trokss",

note = "Publisher Copyright: {\textcopyright} 2022 V. Bezrukovs et al., published by Sciendo.",

year = "2022",

month = jun,

day = "1",

doi = "10.2478/lpts-2022-0024",

language = "English",

volume = "59",

pages = "48--57",

journal = "Latvian Journal of Physics and Technical Sciences",

issn = "0868-8257",

publisher = "Paradigm Publishing Services",

number = "s3",

}

TY - JOUR

T1 - Magnetic Flux Switching Type Permanent Magnet Generator for Bicycles

T2 - Modelling and an Experimental Study

AU - Bezrukovs, V.

AU - Bezrukovs, Vl

AU - Konuhova, M.

AU - Bezrukovs, D.

AU - Berzins, A.

AU - Trokss, J.

PY - 2022/6/1

Y1 - 2022/6/1

N2 - The article introduces two new designs of flux switching permanent magnet alternators with a radial and an axial arrangement of the inductor relative to the magnetic flux switch. The study presents the results of 3D magnetic flux modelling along with the outcomes of physical experiments. In the course of laboratory experiments, the results of theoretical estimations are compared with actual physical performance parameters. The results are presented in the form of power and output voltage curves in relation to the frequency and load current. The study proposes the practical application of the alternators based on the magnetic flux switching principle in the development of a bicycle generator. Laboratory test models are made of a laminated steel using a waste-free technology.

AB - The article introduces two new designs of flux switching permanent magnet alternators with a radial and an axial arrangement of the inductor relative to the magnetic flux switch. The study presents the results of 3D magnetic flux modelling along with the outcomes of physical experiments. In the course of laboratory experiments, the results of theoretical estimations are compared with actual physical performance parameters. The results are presented in the form of power and output voltage curves in relation to the frequency and load current. The study proposes the practical application of the alternators based on the magnetic flux switching principle in the development of a bicycle generator. Laboratory test models are made of a laminated steel using a waste-free technology.

KW - Bicycles

KW - magnetic fields

KW - modelling

KW - permanent magnet machines

UR - https://www.scopus.com/pages/publications/85133913464

U2 - 10.2478/lpts-2022-0024

DO - 10.2478/lpts-2022-0024

M3 - Article

AN - SCOPUS:85133913464

SN - 0868-8257

VL - 59

SP - 48

EP - 57

JO - Latvian Journal of Physics and Technical Sciences

JF - Latvian Journal of Physics and Technical Sciences

IS - s3

ER -

Magnetic Flux Switching Type Permanent Magnet Generator for Bicycles: Modelling and an Experimental Study

Abstract

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this