On the properties of yttria-stabilized zirconia thin films prepared by sol-gel method

Arturas Žalga; Brigita Abakevičiene; Aleksej Žarkov; Aldona Beganskiene; Aivaras Kareiva; Sigitas Tamulevičius

doi:10.5755/j01.ms.17.2.491

On the properties of yttria-stabilized zirconia thin films prepared by sol-gel method

Arturas Žalga
, Brigita Abakevičiene
, Aleksej Žarkov
, Aldona Beganskiene
, Aivaras Kareiva
, Sigitas Tamulevičius^*

^*Corresponding author for this work

Vilnius University
Kaunas University of Technology

Research output: Contribution to journal › Article › peer-review

13 Citations (Scopus)

Abstract

The synthesis of nanostructured films of 20 mol% Y₂O₃ stabilized ZrO₂ on corundum (Al₂O₃) substrates was performed from different sols using dip-coating technique. All obtained samples were repeatedly annealed at 800 °C temperature after each dipping procedure and fully characterized by X-ray diffraction (XRD) analysis. XRD data exhibited that at 800 °C temperature nano-sized Y_0.2Zr_0.8O₂ thin films with cubic (Fm-3m) crystal structure have been formed. The morphological features of obtained coatings were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface tension and hydrophility of the synthesized films were determined by contact angle measurements (CAM).

Original language	English
Pages (from-to)	191-196
Number of pages	6
Journal	Medziagotyra
Volume	17
Issue number	2
DOIs	https://doi.org/10.5755/j01.ms.17.2.491
Publication status	Published - 2011
Externally published	Yes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Nanocoatings
Sol-gel
Solid oxide fuel cells
Suspensions
YSZ

Access to Document

10.5755/j01.ms.17.2.491

Cite this

@article{44e782cdf24b40f6a11be297cd9f38dc,

title = "On the properties of yttria-stabilized zirconia thin films prepared by sol-gel method",

abstract = "The synthesis of nanostructured films of 20 mol\% Y2O3 stabilized ZrO2 on corundum (Al2O3) substrates was performed from different sols using dip-coating technique. All obtained samples were repeatedly annealed at 800 °C temperature after each dipping procedure and fully characterized by X-ray diffraction (XRD) analysis. XRD data exhibited that at 800 °C temperature nano-sized Y0.2Zr0.8O2 thin films with cubic (Fm-3m) crystal structure have been formed. The morphological features of obtained coatings were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface tension and hydrophility of the synthesized films were determined by contact angle measurements (CAM).",

keywords = "Nanocoatings, Sol-gel, Solid oxide fuel cells, Suspensions, YSZ",

author = "Arturas {\v Z}alga and Brigita Abakevi{\v c}iene and Aleksej {\v Z}arkov and Aldona Beganskiene and Aivaras Kareiva and Sigitas Tamulevi{\v c}ius",

year = "2011",

doi = "10.5755/j01.ms.17.2.491",

language = "English",

volume = "17",

pages = "191--196",

journal = "Medziagotyra",

issn = "1392-1320",

publisher = "Kauno Technologijos Universitetas",

number = "2",

}

TY - JOUR

T1 - On the properties of yttria-stabilized zirconia thin films prepared by sol-gel method

AU - Žalga, Arturas

AU - Abakevičiene, Brigita

AU - Žarkov, Aleksej

AU - Beganskiene, Aldona

AU - Kareiva, Aivaras

AU - Tamulevičius, Sigitas

PY - 2011

Y1 - 2011

N2 - The synthesis of nanostructured films of 20 mol% Y2O3 stabilized ZrO2 on corundum (Al2O3) substrates was performed from different sols using dip-coating technique. All obtained samples were repeatedly annealed at 800 °C temperature after each dipping procedure and fully characterized by X-ray diffraction (XRD) analysis. XRD data exhibited that at 800 °C temperature nano-sized Y0.2Zr0.8O2 thin films with cubic (Fm-3m) crystal structure have been formed. The morphological features of obtained coatings were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface tension and hydrophility of the synthesized films were determined by contact angle measurements (CAM).

AB - The synthesis of nanostructured films of 20 mol% Y2O3 stabilized ZrO2 on corundum (Al2O3) substrates was performed from different sols using dip-coating technique. All obtained samples were repeatedly annealed at 800 °C temperature after each dipping procedure and fully characterized by X-ray diffraction (XRD) analysis. XRD data exhibited that at 800 °C temperature nano-sized Y0.2Zr0.8O2 thin films with cubic (Fm-3m) crystal structure have been formed. The morphological features of obtained coatings were investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). The surface tension and hydrophility of the synthesized films were determined by contact angle measurements (CAM).

KW - Nanocoatings

KW - Sol-gel

KW - Solid oxide fuel cells

KW - Suspensions

KW - YSZ

UR - https://www.scopus.com/pages/publications/84867540445

U2 - 10.5755/j01.ms.17.2.491

DO - 10.5755/j01.ms.17.2.491

M3 - Article

AN - SCOPUS:84867540445

SN - 1392-1320

VL - 17

SP - 191

EP - 196

JO - Medziagotyra

JF - Medziagotyra

IS - 2

ER -

On the properties of yttria-stabilized zirconia thin films prepared by sol-gel method

Abstract

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this