Skip to main navigation Skip to search Skip to main content

PLZT electrooptic Q-switch for Er:Cr:YSGG laser

  • Maris Ozolinsh*
  • , Hans J. Eichler
  • , Baining Liu
  • , Qi Zhu
  • *Corresponding author for this work
  • University of Latvia

Research output: Contribution to journal › Conference article › peer-review

13 Citations (Scopus)

Abstract

Q-switching of the Er:Cr:YSGG laser at 2.79 μm is realized using electrooptic modulators of PLZT X/65/35 ceramics. The high (but slow as compared with single crystals) electrooptical effect in PLZT allowed to construct Q-switches with an aperture larger than 4×4 mm2, small lengths of 3-6 mm, with a control voltage of 1000-1500 V. Q-switching is realized using modulators in two modes - as a λ/2 switch placed into the laser cavity at the Brewster angle avoiding reflection losses and as a λ/4 switch with higher single pass losses due to Fresnel reflections. A higher laser output was obtained using λ/2 switching. The obtained pulses had a halfwidth of 150 ns, a pulse build-up time of 1.8-2.5 μs, a single pulse energy of 10-12 mJ as compared with 30 mJ output of the laser for the free-running mode.

Original languageEnglish
Pages (from-to)521-525
Number of pages5
JournalProceedings of SPIE - The International Society for Optical Engineering
Volume3863
DOIs
Publication statusPublished - 1999
EventProceedings of the 1999 International Conference on Biomedical Optics (BMO'99) - Wuhan, China
Duration: 25 Oct 1999 → 27 Oct 1999

Fingerprint

Dive into the research topics of 'PLZT electrooptic Q-switch for Er:Cr:YSGG laser'. Together they form a unique fingerprint.

Cite this