Skip to main navigation Skip to search Skip to main content

Polymerisation and surface modification of methacrylate monoliths in polyimide channels and polyimide coated capillaries using 660nm light emitting diodes

  • Zarah Walsh
  • , Pavel A. Levkin
  • , Silvija Abele
  • , Silvia Scarmagnani
  • , Dominik Heger
  • , Petr Klán
  • , Dermot Diamond
  • , Brett Paull
  • , Frantisek Svec
  • , Mirek Macka*
  • *Corresponding author for this work
  • Dublin City University
  • Lawrence Berkeley National Laboratory
  • Heidelberg University 
  • Masaryk University
  • University of Tasmania

Research output: Contribution to journal › Article › peer-review

21 Citations (Scopus)

Abstract

An investigation into the preparation of monolithic separation media utilising a cyanine dye sensitiser/triphenylbutylborate/. N-methoxy-4-phenylpyridinium tetrafluoroborate initiating system activated by 660. nm light emitting diodes is reported. The work demonstrates multiple uses of red-light initiated polymerisation in the preparation of monolithic stationary phases within polyimide and polyimide coated channels and the modification of monolithic materials with molecules which absorb strongly in the UV region. This initiator complex was used to synthesise poly(butyl methacrylate-co-ethylene dimethacrylate) and poly(methyl methacrylate-co-ethylene dimethacrylate) monolithic stationary phases in polyimide coated fused silica capillaries of varying internal diameters, as well as within polyimide micro-fluidic chips. The repeatability of the preparation procedure and resultant monolithic structure was demonstrated with a batch of poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths in 100 μm i.d. polyimide coated fused silica capillary, which were applied to the separation of a model protein mixture (ribonuclease A, cytochrome C, myoglobin and ovalbumin). Taking an average from 12 chromatograms originating from each batch, the maximum relative standard deviation of the retention factor (. k) for the protein separations was recorded as 0.53%, the maximum variance for the selectivity factor (α) was 0.40% while the maximum relative standard deviation in peak resolution was 8.72%. All maxima were recorded for the Ribonuclease A/Cytochrome C peaks.Scanning electron microscopy confirmed the success of experiments in which poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths were prepared using the same initiation approach in capillary and micro-fluidic chips, respectively. The initiating system was also applied to the photo-initiated grafting of a chromophoric monomer onto poly(butyl methacrylate-co-ethylene dimethacrylate) monoliths within poly(tetrafluoroethylene) coated fused silica capillaries.

Original languageEnglish
Pages (from-to)2954-2962
Number of pages9
JournalJournal of Chromatography A
Volume1218
Issue number20
DOIs
Publication statusPublished - 20 May 2011

Keywords

  • Grafting
  • Micro-fluidic chips
  • Monolith
  • Photo-initiated polymerisation
  • Polyimide
  • Red LED
  • Visible light

Fingerprint

Dive into the research topics of 'Polymerisation and surface modification of methacrylate monoliths in polyimide channels and polyimide coated capillaries using 660nm light emitting diodes'. Together they form a unique fingerprint.

Cite this