Skip to main navigation Skip to search Skip to main content

Sol-gel synthesis, crystal structure, surface morphology, and optical properties of Eu2O3-doped La2Mo3O12 ceramic

  • Ruta Stankeviciute
  • , Arturas Zalga*
  • *Corresponding author for this work
  • Vilnius University

Research output: Contribution to journalArticlepeer-review

10 Citations (Scopus)

Abstract

In this paper, we report the synthesis of the La-Mo-O tartrate gel precursors with the initial composition for La2Mo3O12 ceramic prepared from different starting materials by an aqueous sol-gel synthesis route using tartaric acid as a complexing agent. Moreover, the La-Mo-O carbonate-tartrate and nitrate-tartrate gel precursors doped with x % of Eu2O3 (x = 0.5, 1.0, 2.0, 4.0, and 8.0) by aqueous sol-gel synthesis method were also prepared. The thermal decomposition of both the La-Mo-O carbonate-tartrate and nitrate-tartrate gels, which is the critical stage of this preparation technique, is investigated in detail. X-ray diffraction, scanning electron microscopy, and ultraviolet-visible spectroscopy were used for the determination of crystal structure, surface morphology, and optical properties of the La-Mo-O:xEu2O3 samples annealed at 400, 500, 600, 700, 800, 900, and 1,000 °C temperatures, respectively. The obtained results show that the thermal decomposition of the La-Mo-O tartrate gel precursors has occurred in a separate manner. The differences that came up during the thermal treatment of La-Mo-O tartrate gels have related only with the initial composition that determined the different crystallization ways of final compounds. Besides, the dopant concentration mainly influences the size of obtained particles and agglomeration of synthesized final materials. The initial composition of the La-Mo-O gel precursors has significant influence on the formation of final crystal phases at relatively lower temperatures than was expected according to the TG-DTA measurements. Finally, the optical properties of La-Mo-O tartrate gel precursors annealed at 500 °C depend on the nature of the initial compounds, which were used during the aqueous sol-gel process.

Original languageEnglish
Pages (from-to)925-935
Number of pages11
JournalJournal of Thermal Analysis and Calorimetry
Volume118
Issue number2
DOIs
Publication statusPublished - 18 Jun 2014
Externally publishedYes

Keywords

  • Optical properties
  • Rare earth metals
  • Sol-gel processing
  • Thermal analysis

Fingerprint

Dive into the research topics of 'Sol-gel synthesis, crystal structure, surface morphology, and optical properties of Eu2O3-doped La2Mo3O12 ceramic'. Together they form a unique fingerprint.

Cite this