Skip to main navigation Skip to search Skip to main content

Synthesis and characterization of lead-free 0.5Ba(Zr0.2Ti 0.8)O3-0.5(Ba0.7Ca0.3)TiO 3 ceramic

  • Indrani Coondoo*
  • , Neeraj Panwar
  • , Harvey Amorín
  • , Miguel Alguero
  • , A. L. Kholkin
  • *Corresponding author for this work
  • University of Aveiro
  • ICMM CSIC

Research output: Contribution to journalArticlepeer-review

119 Citations (Scopus)

Abstract

Polycrystalline sample of lead-free 0.5Ba(Zr0.2Ti 0.8)O3-0.5(Ba0.7Ca0.3)TiO 3 ceramic has been synthesized by solid state reaction method. Single-phase perovskite structure with rhombohedral symmetry was confirmed by x-ray diffraction. Temperature dependent dielectric permittivity studies demonstrated frequency independent behavior, indicating that the studied sample was not a typical relaxor ferroelectric. A polymorphic phase transition between rhombohedral and tetragonal phase was noticed near room temperature followed by a tetragonal to cubic transition with 97 °C as the temperature of maximum permittivity. The macroscopic values of d33 and d31 were ∼350 pC/N and -141 pm/V, whereas the electromechanical coupling factors kp and kt were 44.5% and 41.6%, respectively. Bulk P-E hysteresis loop was obtained with saturation polarization 11 μC/cm 2 and coercive field ∼4 kV/cm. Distinct polarization contrast with a complex mosaic-like domain structure was observed in the out-of-plane mode of piezoresponse force microscopy. The domain width and the correlation length were estimated to be nearly 2 μm and 827 nm, respectively. Local hysteresis loop with apparent coercive voltage, Vc = 15.8 V, was observed.

Original languageEnglish
Article number214107
JournalJournal of Applied Physics
Volume113
Issue number21
DOIs
Publication statusPublished - 7 Jun 2013
Externally publishedYes

Fingerprint

Dive into the research topics of 'Synthesis and characterization of lead-free 0.5Ba(Zr0.2Ti 0.8)O3-0.5(Ba0.7Ca0.3)TiO 3 ceramic'. Together they form a unique fingerprint.

Cite this