Pāriet uz galveno navigāciju Pāriet uz meklēšanu Pāriet uz galveno saturu

Characterization of electrospun poly(lactide) composites containing multiwalled carbon nanotubes

  • Ivan Ristić
  • , Aleksandra Miletić
  • , Nevena Vukić
  • , Milena Marinović-Cincović
  • , Krišjānis Šmits
  • , Suzana Cakić
  • , Branka Pilić
  • University of Novi Sad
  • University of Nis

Zinātniskās darbības rezultāts: Devums žurnālam › Zinātniskais raksts (žurnālā) › koleģiāli recenzēts

11 Atsauces (Scopus)

Kopsavilkums

The main aim of this work was to obtain conductive polymer-based materials by incorporation of different amounts of multiwalled carbon nanotubes (MWCNTs) into poly(lactide)(PLA) using the electrospinning technique. Fiber-based nonwovens with 0.2, 0.5, 1, and 3 wt% of MWCNTs were characterized regarding conductivity, morphology, thermal, and mechanical properties. It was confirmed that an increase of the MWCNTs content does not influence the increase of the material conductivity, since the conductivity was 170 ohm sq−1 for all composites. Scanning electron microscopy and transmission electron microscopy analyses revealed that smooth and beadless fibers were obtained, but also average diameters of composite nanofibers decreased with the increase of the MWCNTs content. Differential scanning calorimetry analysis showed that the presence of MWCNTs in the PLA matrix had a significant influence on the crystallization behavior of PLA nanofibers, because the decrease in crystallization temperature (Tc) was detected. Also, the incorporation of MWCNTs into PLA fibers affected the melting process, enabling the generation of α′ form, while had no influence on ordered α crystal. The enthalpy of composite degradation decreased, because MWCNTs are well-known for good heat conductivity, and with that the second step of degradation slowed down, as it was confirmed by thermogravimetric analysis. The addition of MWCNTs improved mechanical properties of composite fibers and caused the increase of both elasticity and tensile strengths of nanofibers.

OriģinālvalodaAngļu
Lapas (no-līdz)695-706
Lapu skaits12
ŽurnālsJournal of Thermoplastic Composite Materials
Sējums34
Izdevuma numurs5
DOIs
Publikācijas statussPublicēts - maijs 2021

OECD Zinātnes nozare

  • 1.3 Fizika un astronomija

Nospiedums

Uzziniet vairāk par pētniecības tēmām “Characterization of electrospun poly(lactide) composites containing multiwalled carbon nanotubes”. Kopā tie veido unikālu nospiedumu.

Citēt šo