Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

Edmunds Zīle; D. Zeleniakiene; Andrejs Aņiskevičs

doi:10.1007/s11029-022-10021-6

Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

Edmunds Zīle^*
, D. Zeleniakiene
, Andrejs Aņiskevičs

^*Šī darba korespondējošais autors

Kaunas University of Technology

Zinātniskās darbības rezultāts: Devums žurnālam › Zinātniskais raksts (žurnālā) › koleģiāli recenzēts

10 Atsauces (Scopus)

Kopsavilkums

This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.

Oriģinālvaloda	Angļu
Lapas (no-līdz)	169-180
Žurnāls	Mechanics of Composite Materials
Sējums	58
Izdevuma numurs	2
DOIs	https://doi.org/10.1007/s11029-022-10021-6
Publikācijas statuss	Publicēts - maijs 2022

ANO IAM

Šis izpildes rezultāts palīdz sasniegt šādus ANO ilgtspējīgas attīstības mērķus (IAM)

9. IAM — Rūpniecība, Inovācija un Infrastruktūra

OECD Zinātnes nozare

1.3 Fizika un astronomija

Piekļuve Dokumentiem

10.1007/s11029-022-10021-6

Citi faili un saites

Citēt šo

@article{2c2843c282b34cee873f940cefb2d8e3,

title = "Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling",

abstract = "This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.",

keywords = "fiber, laminate, fused deposition modelling, voids",

author = "Edmunds Zīle and D. Zeleniakiene and Andrejs Aņiskevi{\v c}s",

note = "Publisher Copyright: {\textcopyright} 2022, Springer Science+Business Media, LLC, part of Springer Nature.",

year = "2022",

month = may,

doi = "10.1007/s11029-022-10021-6",

language = "English",

volume = "58",

pages = "169--180",

journal = "Mechanics of Composite Materials",

issn = "0191-5665",

publisher = "Springer New York",

number = "2",

}

TY - JOUR

T1 - Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

AU - Zīle, Edmunds

AU - Zeleniakiene, D.

AU - Aņiskevičs, Andrejs

PY - 2022/5

Y1 - 2022/5

N2 - This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.

AB - This work is devoted to studying the mechanical behavior of a polylactic acid (PLA) material produced by the fused deposition modelling. The influence of mesostructure on their macro-scale mechanical properties is characterized by porosity. The dependence of its longitudinal and transverse properties on the porosity is found experimentally. It is shown that, due to the crystallization after melting and extrusion, the properties of a single PLA fiber increase in time. The results obtained show that the classical lamination theory and the Tsai–Hill failure criterion can predict the modulus and strength of PLA printed materials.

KW - fiber

KW - laminate

KW - fused deposition modelling

KW - voids

UR - https://link.springer.com/article/10.1007/s11029-022-10021-6

UR - https://www.scopus.com/pages/publications/85130452044

U2 - 10.1007/s11029-022-10021-6

DO - 10.1007/s11029-022-10021-6

M3 - Article

SN - 0191-5665

VL - 58

SP - 169

EP - 180

JO - Mechanics of Composite Materials

JF - Mechanics of Composite Materials

IS - 2

ER -

Characterization of Polylactic Acid Parts Produced Using the Fused Deposition Modelling

Kopsavilkums

ANO IAM

OECD Zinātnes nozare

Piekļuve Dokumentiem

Citi faili un saites

Nospiedums

Citēt šo