Development of a liquid Pb-Bi target for high-power ISOL facilities

D. Houngbo; A. P. Bernardes; J. C. David; M. Delonca; K. Kravalis; S. Lahiri; R. Losito; C. Maglioni; A. Marchix; T. M. Mendonca; L. Popescu; D. Schumann; P. Schuurmans; T. Stora; J. Vollaire; J. Vierendeels

doi:10.1016/j.nimb.2016.01.021

Development of a liquid Pb-Bi target for high-power ISOL facilities

D. Houngbo^*
, A. P. Bernardes
, J. C. David
, M. Delonca
, K. Kravalis
, S. Lahiri
, R. Losito
, C. Maglioni
, A. Marchix
, T. M. Mendonca
, L. Popescu
, D. Schumann
, P. Schuurmans
, T. Stora
, J. Vollaire
, J. Vierendeels

^*Šī darba korespondējošais autors

Fizikas institūts

Belgian Nuclear Research Center
Ghent University
CERN
CNRS-CEA CEA-Saclay
Université de technologie de Belfort Montbéliard
Saha Institute of Nuclear Physics
Paul Scherrer Institute

Zinātniskās darbības rezultāts: Devums žurnālam › Zinātniskais raksts (žurnālā) › koleģiāli recenzēts

2 Atsauces (Scopus)

Kopsavilkums

This paper describes some R&D activities conducted in support of the design and safe operation of a high-power liquid Pb-Bi target within the LIEBE (Liquid Eutectic Lead Bismuth Loop Target for EURISOL) project. The target material is lead bismuth eutectic (LBE) which also acts as a primary coolant. As a consequence of interaction of the highly pulsed 1.4-GeV protons at ISOLDE with the target, heat powers of the order of 2 GW would be instantaneously deposited in the target during a bunch. Considerable R&D effort is thus required to demonstrate its continued coolability and structural integrity. This paper mainly reports on the conjugate flow (CFD) and heat deposition (Monte Carlo) calculations, not accounting for Fluid-Structure Interactions.

Oriģinālvaloda	Angļu
Lapas (no-līdz)	57-59
Lapu skaits	3
Žurnāls	Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms
Sējums	376
DOIs	https://doi.org/10.1016/j.nimb.2016.01.021
Publikācijas statuss	Publicēts - 1 jūn. 2016

Piekļuve Dokumentiem

10.1016/j.nimb.2016.01.021

Citi faili un saites

Saite uz publikāciju Scopus

Citēt šo

Houngbo, D., Bernardes, A. P., David, J. C., Delonca, M., Kravalis, K., Lahiri, S., Losito, R., Maglioni, C., Marchix, A., Mendonca, T. M., Popescu, L., Schumann, D., Schuurmans, P., Stora, T., Vollaire, J., & Vierendeels, J. (2016). Development of a liquid Pb-Bi target for high-power ISOL facilities. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 376, 57-59. https://doi.org/10.1016/j.nimb.2016.01.021

@article{a8dc0194011d4a7b911c80fc2c35a62c,

title = "Development of a liquid Pb-Bi target for high-power ISOL facilities",

abstract = "This paper describes some R\&D activities conducted in support of the design and safe operation of a high-power liquid Pb-Bi target within the LIEBE (Liquid Eutectic Lead Bismuth Loop Target for EURISOL) project. The target material is lead bismuth eutectic (LBE) which also acts as a primary coolant. As a consequence of interaction of the highly pulsed 1.4-GeV protons at ISOLDE with the target, heat powers of the order of 2 GW would be instantaneously deposited in the target during a bunch. Considerable R\&D effort is thus required to demonstrate its continued coolability and structural integrity. This paper mainly reports on the conjugate flow (CFD) and heat deposition (Monte Carlo) calculations, not accounting for Fluid-Structure Interactions.",

keywords = "Heat deposition, High-power ISOL target, Liquid metal, Radioactive ion beams",

author = "D. Houngbo and Bernardes, \{A. P.\} and David, \{J. C.\} and M. Delonca and K. Kravalis and S. Lahiri and R. Losito and C. Maglioni and A. Marchix and Mendonca, \{T. M.\} and L. Popescu and D. Schumann and P. Schuurmans and T. Stora and J. Vollaire and J. Vierendeels",

note = "Publisher Copyright: {\textcopyright} 2016 Elsevier B.V.",

year = "2016",

month = jun,

day = "1",

doi = "10.1016/j.nimb.2016.01.021",

language = "English",

volume = "376",

pages = "57--59",

journal = "Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms",

issn = "0168-583X",

publisher = "Elsevier B.V.",

}

Houngbo, D, Bernardes, AP, David, JC, Delonca, M, Kravalis, K, Lahiri, S, Losito, R, Maglioni, C, Marchix, A, Mendonca, TM, Popescu, L, Schumann, D, Schuurmans, P, Stora, T, Vollaire, J & Vierendeels, J 2016, 'Development of a liquid Pb-Bi target for high-power ISOL facilities', Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, sēj. 376, lpp. 57-59. https://doi.org/10.1016/j.nimb.2016.01.021

Development of a liquid Pb-Bi target for high-power ISOL facilities. / Houngbo, D.; Bernardes, A. P.; David, J. C. u.c.
(gadā): Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, Sēj. 376, 01.06.2016, lpp. 57-59.

Zinātniskās darbības rezultāts: Devums žurnālam › Zinātniskais raksts (žurnālā) › koleģiāli recenzēts

TY - JOUR

T1 - Development of a liquid Pb-Bi target for high-power ISOL facilities

AU - Houngbo, D.

AU - Bernardes, A. P.

AU - David, J. C.

AU - Delonca, M.

AU - Kravalis, K.

AU - Lahiri, S.

AU - Losito, R.

AU - Maglioni, C.

AU - Marchix, A.

AU - Mendonca, T. M.

AU - Popescu, L.

AU - Schumann, D.

AU - Schuurmans, P.

AU - Stora, T.

AU - Vollaire, J.

AU - Vierendeels, J.

PY - 2016/6/1

Y1 - 2016/6/1

N2 - This paper describes some R&D activities conducted in support of the design and safe operation of a high-power liquid Pb-Bi target within the LIEBE (Liquid Eutectic Lead Bismuth Loop Target for EURISOL) project. The target material is lead bismuth eutectic (LBE) which also acts as a primary coolant. As a consequence of interaction of the highly pulsed 1.4-GeV protons at ISOLDE with the target, heat powers of the order of 2 GW would be instantaneously deposited in the target during a bunch. Considerable R&D effort is thus required to demonstrate its continued coolability and structural integrity. This paper mainly reports on the conjugate flow (CFD) and heat deposition (Monte Carlo) calculations, not accounting for Fluid-Structure Interactions.

AB - This paper describes some R&D activities conducted in support of the design and safe operation of a high-power liquid Pb-Bi target within the LIEBE (Liquid Eutectic Lead Bismuth Loop Target for EURISOL) project. The target material is lead bismuth eutectic (LBE) which also acts as a primary coolant. As a consequence of interaction of the highly pulsed 1.4-GeV protons at ISOLDE with the target, heat powers of the order of 2 GW would be instantaneously deposited in the target during a bunch. Considerable R&D effort is thus required to demonstrate its continued coolability and structural integrity. This paper mainly reports on the conjugate flow (CFD) and heat deposition (Monte Carlo) calculations, not accounting for Fluid-Structure Interactions.

KW - Heat deposition

KW - High-power ISOL target

KW - Liquid metal

KW - Radioactive ion beams

UR - https://www.scopus.com/pages/publications/84957054271

U2 - 10.1016/j.nimb.2016.01.021

DO - 10.1016/j.nimb.2016.01.021

M3 - Article

AN - SCOPUS:84957054271

SN - 0168-583X

VL - 376

SP - 57

EP - 59

JO - Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

JF - Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms

ER -

Development of a liquid Pb-Bi target for high-power ISOL facilities

Kopsavilkums

Piekļuve Dokumentiem

Citi faili un saites

Nospiedums

Citēt šo