Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferommeter output mirror

M. Ozolinsh; H. J. Eichler

Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferommeter output mirror

M. Ozolinsh^*
, H. J. Eichler

^*Šī darba korespondējošais autors

Adaptīvās optikas tehnoloģiju laboratorija, Cietvielu fizikas institūts

University of Latvia

Zinātniskās darbības rezultāts: Devums konferencē › Konferences raksts › koleģiāli recenzēts

Kopsavilkums

The description of a Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferometer output mirror was presented. By applying short 3 μs negative voltage pulses, Q-switching was achieved. In PLZT ceramics the electro-optic effect was quadratic one and by increasing the DC bias and pulse control voltage it was possible to realize Q-switching down from the 3λ/4 Q-switch high-loss state through the 2λ/4 low-loss state.

Oriģinālvaloda	Angļu
Lapas	533
Lapu skaits	1
Publikācijas statuss	Publicēts - 2001
Pasākums	Conference on Lasers and Electro-Optics (CLEO) - Baltimore, MD, Amerikas Savienotās Valstis Ilgums: 6 maijs 2001 → 11 maijs 2001

Konference

Konference	Conference on Lasers and Electro-Optics (CLEO)
Valsts/Teritorija	Amerikas Savienotās Valstis
Pilsēta	Baltimore, MD
Periods	6/05/01 → 11/05/01

Citi faili un saites

Saite uz publikāciju Scopus

Citēt šo

@conference{1a0267c9d5e54d6980ffb326b87a07f2,

title = "Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferommeter output mirror",

abstract = "The description of a Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferometer output mirror was presented. By applying short 3 μs negative voltage pulses, Q-switching was achieved. In PLZT ceramics the electro-optic effect was quadratic one and by increasing the DC bias and pulse control voltage it was possible to realize Q-switching down from the 3λ/4 Q-switch high-loss state through the 2λ/4 low-loss state.",

author = "M. Ozolinsh and Eichler, \{H. J.\}",

year = "2001",

language = "English",

pages = "533",

note = "Conference on Lasers and Electro-Optics (CLEO) ; Conference date: 06-05-2001 Through 11-05-2001",

}

Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferommeter output mirror. / Ozolinsh, M.; Eichler, H. J.
2001. 533 Pētnieciskais darbs prezentēts Conference on Lasers and Electro-Optics (CLEO), Baltimore, MD, Amerikas Savienotās Valstis.

Zinātniskās darbības rezultāts: Devums konferencē › Konferences raksts › koleģiāli recenzēts

TY - CONF

T1 - Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferommeter output mirror

AU - Ozolinsh, M.

AU - Eichler, H. J.

PY - 2001

Y1 - 2001

N2 - The description of a Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferometer output mirror was presented. By applying short 3 μs negative voltage pulses, Q-switching was achieved. In PLZT ceramics the electro-optic effect was quadratic one and by increasing the DC bias and pulse control voltage it was possible to realize Q-switching down from the 3λ/4 Q-switch high-loss state through the 2λ/4 low-loss state.

AB - The description of a Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferometer output mirror was presented. By applying short 3 μs negative voltage pulses, Q-switching was achieved. In PLZT ceramics the electro-optic effect was quadratic one and by increasing the DC bias and pulse control voltage it was possible to realize Q-switching down from the 3λ/4 Q-switch high-loss state through the 2λ/4 low-loss state.

UR - https://www.scopus.com/pages/publications/0034801246

M3 - Paper

AN - SCOPUS:0034801246

SP - 533

T2 - Conference on Lasers and Electro-Optics (CLEO)

Y2 - 6 May 2001 through 11 May 2001

ER -

Er:Cr:YSGG laser with electrooptic PLZT ceramics Q-switching Fabry-Perot interferommeter output mirror

Kopsavilkums

Konference

Citi faili un saites

Nospiedums

Citēt šo