Influence of moisture on the structure and properties of the interphase layer of a composite based on an epoxy binder with a disperse filler

Properties of a model composite based on an ED-22 epoxy binder, cured with polyprophylene polyamine, and disperse LiF crystals as a filler were investigated by the methods of dilatometry and X-ray diffractometry. It was established that the density of cross-links of the epoxy binder in the interphase layer was lower than in a block specimen. Therefore, the thermal expansion of the composite on heating to 120°C, in terms of that of the binder, grew significantly with the degree of filling φ, and the water uptake also increased at the initial stage. The presence of absorbed water led to considerable changes in the structure and properties of the composite interphase: the binder became more cross-linked, its structural ordering decreased, the thermal expansion at heating diminished by a factor of 3. 7 (at φ = 50%), and the glass-transition temperature increased. As a result of long-term action of moisture, changes in the internal stresses had an extreme character.