MECHANICAL CHARACTERISATION OF SOME POLYMERS USED IN 3D PRINTING

Andrejs Aņiskevičs; Edmunds Zīle; Olga Bulderberga; Daiva Zeleniakiene

MECHANICAL CHARACTERISATION OF SOME POLYMERS USED IN 3D PRINTING

Andrejs Aņiskevičs
, Edmunds Zīle
, Olga Bulderberga
, Daiva Zeleniakiene

Latvijas Universitāte

Kaunas University of Technology

Pētījuma izpildes rezultāts: Nodaļa grāmatā/enciklopēdijā/konferences krājumā › Konferences zinātniskais raksts › Pētniecība › koleģiāli recenzēts

2 Atsauces (Scopus)

Kopsavilkums

With the advancement of fused deposition modelling (FDM), there is a great need for new high-performance materials capable of meeting the requirements of different engineering applications. This study focuses on the comparative evaluation of mechanical characteristics of such thermoplastic polymers processed by FDM as PLA (several variants), PC, PA, ABS, TPU95A, PP, CPE, PET-G, PEI, and PEKK. Tensile properties of “as-produced” filaments, extruded mono-fibres, and unidirectional printed specimens are compared. The compatibility of different polymer types for hybrid structures is evaluated in the adhesion tests.

Oriģinālvaloda	Angļu
Rīkotāja publikācijas nosaukums	Characterization
Redaktori	Anastasios P. Vassilopoulos, Veronique Michaud
Lapas	1196-1203
Lapu skaits	8
Sējums	3
ISBN (Elektroniski)	9782970161400
Publikācijas statuss	Publicēts - 2022

Publikāciju sērijas

Nosaukums	ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability
Sējums	3

ANO IAM

Šis izpildes rezultāts palīdz sasniegt šādus ANO ilgtspējīgas attīstības mērķus (IAM)

9. IAM — Rūpniecība, Inovācija un Infrastruktūra

Citi faili un saites

Citēt šo

@inproceedings{9b2c0ea07c8945acabeead86a653e5e8,

title = "MECHANICAL CHARACTERISATION OF SOME POLYMERS USED IN 3D PRINTING",

abstract = "With the advancement of fused deposition modelling (FDM), there is a great need for new high-performance materials capable of meeting the requirements of different engineering applications. This study focuses on the comparative evaluation of mechanical characteristics of such thermoplastic polymers processed by FDM as PLA (several variants), PC, PA, ABS, TPU95A, PP, CPE, PET-G, PEI, and PEKK. Tensile properties of “as-produced” filaments, extruded mono-fibres, and unidirectional printed specimens are compared. The compatibility of different polymer types for hybrid structures is evaluated in the adhesion tests.",

keywords = "Tensile modulus, Density, Strength, Fused deposition modelling",

author = "Andrejs Aņiskevi{\v c}s and Edmunds Zīle and Olga Bulderberga and Daiva Zeleniakiene",

note = "Publisher Copyright: {\textcopyright} 2022 Aniskevich et al.",

year = "2022",

language = "English",

isbn = "9782970161400",

volume = "3",

series = "ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability",

pages = "1196--1203",

editor = "Vassilopoulos, \{Anastasios P.\} and Veronique Michaud",

booktitle = "Characterization",

}

MECHANICAL CHARACTERISATION OF SOME POLYMERS USED IN 3D PRINTING. / Aņiskevičs, Andrejs; Zīle, Edmunds; Bulderberga, Olga u.c.
Characterization. red. / Anastasios P. Vassilopoulos; Veronique Michaud. Sēj. 3 2022. lpp. 1196-1203 (ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability; Sēj. 3).

Pētījuma izpildes rezultāts: Nodaļa grāmatā/enciklopēdijā/konferences krājumā › Konferences zinātniskais raksts › Pētniecība › koleģiāli recenzēts

TY - GEN

T1 - MECHANICAL CHARACTERISATION OF SOME POLYMERS USED IN 3D PRINTING

AU - Aņiskevičs, Andrejs

AU - Zīle, Edmunds

AU - Bulderberga, Olga

AU - Zeleniakiene, Daiva

PY - 2022

Y1 - 2022

N2 - With the advancement of fused deposition modelling (FDM), there is a great need for new high-performance materials capable of meeting the requirements of different engineering applications. This study focuses on the comparative evaluation of mechanical characteristics of such thermoplastic polymers processed by FDM as PLA (several variants), PC, PA, ABS, TPU95A, PP, CPE, PET-G, PEI, and PEKK. Tensile properties of “as-produced” filaments, extruded mono-fibres, and unidirectional printed specimens are compared. The compatibility of different polymer types for hybrid structures is evaluated in the adhesion tests.

AB - With the advancement of fused deposition modelling (FDM), there is a great need for new high-performance materials capable of meeting the requirements of different engineering applications. This study focuses on the comparative evaluation of mechanical characteristics of such thermoplastic polymers processed by FDM as PLA (several variants), PC, PA, ABS, TPU95A, PP, CPE, PET-G, PEI, and PEKK. Tensile properties of “as-produced” filaments, extruded mono-fibres, and unidirectional printed specimens are compared. The compatibility of different polymer types for hybrid structures is evaluated in the adhesion tests.

KW - Tensile modulus

KW - Density

KW - Strength

KW - Fused deposition modelling

UR - https://infoscience.epfl.ch/record/298799

UR - https://www.scopus.com/pages/publications/85149183254

M3 - Conference paper

SN - 9782970161400

VL - 3

T3 - ECCM 2022 - Proceedings of the 20th European Conference on Composite Materials: Composites Meet Sustainability

SP - 1196

EP - 1203

BT - Characterization

A2 - Vassilopoulos, Anastasios P.

A2 - Michaud, Veronique

ER -

MECHANICAL CHARACTERISATION OF SOME POLYMERS USED IN 3D PRINTING

Kopsavilkums

Publikāciju sērijas

ANO IAM

Citi faili un saites

Nospiedums

Citēt šo